LINK CHAINS      

                                      CHAIN FROM GR30 TO 80 U.S. FED. SPEC.     
                                                 STAINLESS STEEL CHAIN
                                                    GR 80 CHAIN FITTING
                                              AIR CRAFT TIE DOWN CHAIN
                                                   ISO LOAD CHAIN

                                                                                                   

Sub pages withing the chain group.

Chain fittings

Wire rope fittings

Stainless steel fittings

Through hardened ISO LOAD CHAIN - only for use on manual hoists. CODE NO DIA. MM PITCH MM. INSIDE WIDTH MM. WORKING LOAD LIMIT METRIC TON MIN. BREAK LOAD KN. WT KG /MTRS ISO6 6+/-0.2 18 +0.25 7.7 +0.20 1.1 45 0.79 -0.10 -0.20 IS07 7+/-0.3 21 +.030 9 +0.30 1.47 60 1.10 -0.15 -0.20 ISO8 8+/-0.3 24 +0.30 10.3 +0.30 1.96 80 1.40 -0.15 -0.30 ISO10 10+/-0.4 28 +0.35 13.2 +0.40 3.14 100 2.20 -0.20 -0.40 ISO11 11+/-0.4 31 +.040 14.5 +0.40 3.68 150 2.70 -0.20 -0.50 FINISH: BLACK WITH ANTI- RUST PROTECTIVE COATING.  STD PACK: 200MTRS AND LIGHTLY OILED. PITCH CALIBRATED TO TOLERANCE  AS PER   DIMENSIONS SHOWN IN THIS TABLE.	AIR CRAFT TIE DOWN CHAIN GR. 80. CODE NO DIA. MM PITCH MM. INSIDE WIDTH MM. WORKING LOAD LIMIT METRIC TON MIN. BREAK LOAD KN. WT KG /MTRS TDISO6 6 18 7.5 1.08 45.4 0.79 TDIS07 7 21 8.8 1.47 61.6 1.10 TDISO8 8 24 10 1.96 80.6 1.40 TDISO10 10 28 12.5 3.14 126 2.20 TDISO12 12 36 15.0 4.50 182 2.70 FINISH: GOLD PASSIVATED  RUST PROTECTIVE COATING.  STD PACK: 200MTRS. ALSO AVAILABLE WITH  BEND GRAB HOOK ON ONE END AS A WELDED   LASHING SET.
HIGH TENSILE  LASHING CHAIN GRADE 40 TRADE SIZE INCH LINK DIMENSIONS INSIDE INCHES GRADE 30 GRADE 40 GRADE 70 GRADE 80 WT LBS. PER FOOT. LENGTH WIDTH WORKING LOAD LIMIT. LBS. 1/8 0.78 0.29 375 20 3/16 0.94 0.40 850 42 1/4 1.24 0.47 1450 2600 3600 4100 64 5/16 1.28 0.50 2200 3900 5400 5100 86 3/8 1.38 0.57 3050 5400 7500 7300 140 1/2 1.54 0.79 5150 9200 12750 13000 260 FINISH:  BLACK  RUST PROTECTIVE COATING OR SELF COLOUR BRIGHT .  STD PACK: 200MTRS.	REGULAR LINK STAINLESS CHAIN STAINLESS REGULAR LINK BRIGHT POLISH CHAIN CHAIN SIZE MWL TONNES S MM R MM F MM PART NO-304 PART NO-316 MTRS/ 100KG 4 0.11 4 18.3 16.3 S04304 S04316 317.5 6 0.32 6.3 26.4 24 S06304 S06316 126.3 8 0.53 8 34.3 30.1 S08304 S08316 78.7 10 0.86 10 41.5 36 S10304 S10316 50 13 1.5 12.7 50.2 45.8 S13304 S13316 31.5
	SHORT LINK STAINLESS CHAIN STAINLESS SHORT LINK CHAIN CHAIN SIZE MWL TONNES S MM R MM F MM PART NO-304 PART NO-316 MTRS/ 100KG 6 0.4 6.3 18.6 21.6 41216 41140 114.4 8 0.64 8 23.8 27 41217 41141 70.2 10 1 10 29.8 34.3 41218 41142 46 13 1.7 12.7 38 42.5 41219 41143 28.2

                                            CHAIN  CONFORMING TO  USA FEDERAL SPECIFICATION.

                                                     Stainless steel chain short and regular link

        OTHER GENERAL COMMERCIAL GRADE CHAIN IS ALSO AVAILABLE.
CHAIN ARE PROOF TESTED.
               

LAST UPDATED: 01 Sep 1999

             10 Merrion Place, Kew,  Victoria,  Australia 3101            Tel:61-3-98527999         Fax:61-3-98527988